紧配合 [
jǐn pèi hé]
{机} close fit
flush fit
interference fit
tight fit
driven fit
- 6、法兰采用高强度螺栓连接,其螺孔不是紧配合的。
6、flange joint with high intensity bolt,its bolt screw is not tighten match. - 极度疲劳区需要进行冷加工或使用干涉配合(静配合/紧配合/压配合)紧固螺钉。
Cold working and / or interference fit fasteners may be called-out in critical fatigue areas. - 内环与轴用键联接,外环尺寸公差为n6须于公差为K7的机壁紧配合,但机壁的刚度要足够。
The inner race is keyed to the shaft.The outer race has n6 tolerance to give a press fit in a K7 housing.But the housing must be strong enough.